Introduction

This article will be going over how to connect the Micro using the JTAG debugger to upgrade and debug firmware. 

Prerequisites 

• Download MCUXpresso ( Click here for step by step instructions)
• JTAG debugger 
• Micro without the enclosure

Connecting JTAG to Micro

1. Connect the debugger to the Test PC (i.e. J-Link or PE Micro Debugger)

• • Connect USB A to the pc and micro USB B to the JTAG
• 
• 
  
  • Plug green pcb into the JTAG

2. Once plugged now attach the gray cable to the rtcam as follow