RS-485 Adapter Setup

RS-485 Connection Setup: 

Driver Setup: 

1. Using the provided RS-485 USB adapter: 
2. 
3. Check that the cables are connected to the right port, RS485A should be D- and RS485B should be D+  

 Download the driver if required:

http://www.wch.cn/download/ch341ser_exe.html 

• Run the downloaded EXE file (CH341SER.EXE) 
• Select Ch341SER.INF and Hit Install 

• The Driver for the adapter is now installed and setup. 

Serial Connection: 

1. To open communication with the Camera, use a serial terminal program, such as PUTTY, Tera Term or Mobaxterm.  Download Tera Term: https://osdn.net/projects/ttssh2/releases/) 
2. Once Tera Term is installed, open COM communication with the Vision Sensor at the respective port at a Baud Rate of 115200.