Introduction

This article explains how to download and run the Body Pose demo on the Maivin. 

Requirements

• Quick Start Guide
• Maivin AI Vision Starter Kit
• SSH into the Maivin

Instructions

1. Power on the Maivin 
2. Open cmd prompt and navigate to the maivin terminal using SSH.

   # ssh torizon@<board_name> 

3. Once in the Maivin terminal run
   

   sudo systemctl start bodypose

4. After running the above cmd you can use "systemctl status bodypose" to view the status of the app
5. Navigate to the webpage inputting the board name on the webpage, the webpage will show the vpkui

Notes

• The board name can be found on the sticker attached at the bottom of the Maivin.

Known Issues

1. There are several stability issues regarding the camera driver.  Rebooting the Maivin will usually clear these issues.  If the camera does not work after two consecutive reboots, please enter a ticket.  Issues with the camera driver are currently under investigation and include:
   1. The webpage shows black camera feed
   2. The webpage camera feed is upside down