Introduction

This article explains how to download and run the Face Detection demo on the Maivin. 

Requirements

• Quick Start Guide
• Maivin AI Vision Starter Kit
  • Torizon for Maivin 6.5.0.2 or newer
• SSH into the Maivin

Instructions

1. Power on the Maivin 
2. Open cmd prompt and navigate to the maivin terminal using SSH.

   # ssh torizon@<board_name> 

3. Once in the Maivin terminal run
   

   sudo systemctl start facedetectui

4. After running the above cmd you can use "systemctl status facedetectui" to view the status of the app
5. Navigate to the webpage inputting the board name on the webpage, the webpage will show the vpkui

Notes

• The board name can be found on the sticker attached at the bottom of the Maivin.

Known Issues

When the Maivin EdgeFirst Middleware detect service is running along with the AI Application Zoo samples the model performance will be degraded as both are running on the NPU at the same time.